Drivers to Baffles

Before you begin, please note: Natural wood baffles (Oak, Walnut, etc.) are numbered/marked on the back to ensure the continuous flow of the wood grain.

• Take the baffles one by one, starting from the bottom baffle of either speakers and mount the woofers to baffles as follows;
• Place the baffle on your knees or a stable surface.
• Position the woofer on the baffle, aligning the posts (push terminals) to 8 PM when viewed from the front of the baffle. (Insert two bolts to hold the woofer in place).
• Tighten all eight bolts securely, but not so tightly that the ring becomes deformed.
• Place the mounted baffle+woofer aside and proceed to remaining woofers.
• Repeat the same procedure with the 10 Mid Driver
• Repeat the same procedure with the Voxativ driver, and please note that the binding posts of the Voxativ Driver should be positioned at the recess on the back of the baffle