Side Walls (Brackets) to Base

• Each side wall consists of 3 brackets. Locate the bottom brackets.
• Lay down the parts on the floor.
• Make sure side walls are positioned correctly.
• Tighten the side brackets to the base with three M6 bolts and washers (in-case washers are included) from the bottom part of the base.
• Stand the base and brackets up right and continue with the next step.

Middle to Bottom Brackets

•  Identify the Middle Bracket – This is the shortest bracket.
• Check Orientation – A small V-shaped cutout is located at it’s top, indicating the correct position (see arrows).
• Align the bracket correctly to bottom brackets . Attach with Side Bolts – Insert and partially tighten the three bolts from the side.
• Secure the Back Bolts – Connect the two short bolts at the back of the bracket.
• Fully Tighten All Bolts – Once all bolts are in place, tighten them securely.
• Repeat for all middle brackets.

Top to Middle Brackets

• Position correctly and screw in three bolts from the side.
  Do not tighten the bolts completely.
• Connect two short bolts at the back of the bracket.
• Now tighten all bolts.
• Repeat with remaining brackets.

Positioning the Pads

• Locate the rubber pads and position them as show in image. 
• Your frame is Complete! Please continue to the next step.